Fitted Flat Facemask
DACIAN is a Taiwan mask manufacturing company producing fitted flat facemasks for people exposed to bad air quality in daily life and work environments. This mask for bad air quality is designed for PM2.5, dust, smoke, cooking fumes, light industrial particles, and urban pollution.
Many flat masks are easy to carry but may collapse against the mouth or leave gaps around the face. DACIAN’s fitted flat design uses a folded structure that creates breathing space and helps the mask sit closer along the cheeks and chin. This makes it suitable for workers, commuters, kitchen staff, factory teams, and users who need a slim mask that can be worn for longer periods.
It is also suitable for distributors, importers, retailers, corporate procurement teams, and other B2B buyers looking for mask products for workplace use and resale channels.
Built for Real Air-Quality Problems
This mask for bad air quality is designed for environments where airborne particles are part of daily exposure:
- PM2.5 during commuting or outdoor work
- Dust from construction, warehouse, or factory environments
- Cooking oil mist and kitchen fumes
- Smoke from traffic, barbecue, or industrial surroundings
- Pollen and general airborne particles during seasonal changes
- Heavy metal particles found in industrial and traffic emissions
Less Gap, Better Fit: 3.5 cm Narrower Than Standard Masks
Standard flat masks are often around 9 cm wide, which can leave extra side gaps and reduce fit during daily wear. Our redesigned mask removes 3.5 cm of unnecessary width, helping the mask sit closer to the face while staying comfortable.
A good mask for poor air quality should filter particles and remain easy to wear throughout the day. If users feel pressure, heat buildup, or mask collapse, they may adjust it often or take it off.
The fitted flat structure creates more space around the mouth and nose, improving breathing comfort. Its slimmer shape also helps reduce edge gaps.
Filter Material and Particle Protection
The filtration layer uses a microporous membrane with over 95% filtration efficiency, helping reduce exposure to fine airborne particles in daily and workplace environments.
Designed to block both oil and non-oil particles, the mask provides filtration behavior comparable to N95 and P95 performance levels, making it suitable for a wider range of pollution sources.
Its HEPA H12–H13 grade filter material helps capture finer particulate matter, including dust, smoke, PM2.5, and airborne contaminants that may be difficult to filter with standard disposable masks.
The filter also helps reduce exposure to heavy metal particles commonly found in industrial emissions and high-traffic urban areas.
Reusable Design for Lower Waste and Daily Convenience
Unlike disposable masks designed for single use, this fitted flat facemask can be used for 3–4 days per cycle, depending on air-quality conditions and exposure levels.
One reusable mask can replace approximately 6–8 disposable masks, helping reduce material waste and long-term replacement costs for both individual users and workplace procurement programs.
The mask is compatible with 75%–95% alcohol cleaning, allowing users to maintain the mask more easily between uses while extending product usability.
For buyers looking for a reusable mask without giving up filtration performance, this design offers a practical balance between daily protection, convenience, and environmental impact.
Compare Models in This Range
The fitted flat facemask removes unnecessary width from a standard flat mask to reduce side gaps while keeping a slim profile. The models below share the same filter material and differ by application and color. Certification for this range is shown per model.
| Model | Best suited for | Certification | Packaging | Reuse | Sizes |
|---|---|---|---|---|---|
| dcNE01 | Chemical aerosol and VOC mist with a slim, close facial fit | EN 14683 Type IIR | 12 pcs/Box, single pack per mask | 3-4 days per mask | One size (fitted flat) |
| dcNH01 | Kitchen smoke and grease aerosol in slim fitted format | EN 14683 Type IIR | 12 pcs/Box, single pack per mask | 3-4 days per mask | One size (fitted flat) |
| dcNJ01 | Grinding and polishing dust where edge sealing matters | EN 14683 Type IIR | 12 pcs/Box, single pack per mask | 3-4 days per mask | One size (fitted flat) |
| dcNO01 | Dental clinics and labs, procedure aerosols and grinding dust | EN 14683 Type IIR | 12 pcs/Box, single pack per mask | 3-4 days per mask | One size (fitted flat) |
| dcNX01 | PM2.5 and daily air pollution in slim fitted format | EN 14683 Type IIR | 12 pcs/Box, single pack per mask | 3-4 days per mask | One size (fitted flat) |
Selection Checklist for B2B Buyers
- Use environment: PM2.5, kitchen smoke, oil mist, chemical aerosol, grinding powder, industrial dust, daily commuting or dental clinic settings.
- Wearing time: short daily use, long workplace shifts or repeated use.
- Target user: adult, child, worker, clinic staff, kitchen team or general distribution.
- Required documents: certification and laboratory test reports for your destination market.
Certification, Traceability & Factory
- Every box carries a unique serial number. Scanning the QR code on the seal shows the filter test date, the filter test report, the mask production date and the box serial number. See Quality Commitment.
- Filter material is tested batch by batch by an independent third-party laboratory; only approved batches enter production.
- Reusable microporous membrane filter that is water- and alcohol-resistant, so filtration performance is retained after cleaning, unlike electrostatic melt-blown masks that lose efficiency in humid conditions.
Our Factory
Dacian runs ISO 13485, CE PPE and GMP/QMS certified production lines with an FFU air filtration system and UVC room sterilization. Every mask is UVC-sterilized before packaging. See the factory.
Certifications & Test Reports
Dacian holds international certifications and third-party test reports at the company level. Click a badge to open the report, or view all on the Certifications & Test Reports page.
EU CE PPE EN 149
China GB/T 32610 Class A
China GB 2626 KN95
Korea KATRI KF94
Japan KAKEN PFE
Japan KAKEN BFE
NELSON Lab VFEWholesale & Distribution
This range is available for distributors, importers, retailers and corporate procurement. Reusable masks lower per-use cost and support occupational safety and ESG programs. Send your market and target volume for a wholesale quotation.
Frequently Asked Questions
Select by work environment and wearing time rather than by appearance. All models share the same filter material; application, color and packaging are the practical differences. The comparison table above lists best-fit scenarios.
Provide the model or application, target quantity, destination market and any certification documents you need for your market.
Our standard MOQ is 3,000 pieces. If you need a smaller quantity, please contact us to discuss your requirements.
Standard products are generally available within 3–7 business days. For customized products or large-volume orders, lead times may vary based on the order requirements. We can also support urgent and temporary orders when needed.
Yes. We supply distributors, importers and retailers for wholesale orders. See Become a Distributor.
Certification is listed per model in the table above, and company-level test reports are on the Certifications & Test Reports page. Documents for your market can be issued at the quotation stage.
